Acer AT3230B Kullanıcı Kılavuzu - Sayfa 6
LCD TV Acer AT3230B için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acer AT3230B 22 sayfaları.
Sayfayı Yazdır
Basic connections
Connecting the power cord
1
Connect the AC cord into the AC input on the back of the
set.
2
Connect the plug to the wall outlet as shown.
Setting up the remote control
1
Open the cover on the back of the remote unit.
2
Insert two AAA batteries (supplied) to match the polarity
indicated inside the battery compartment.
Enjoying analog and digital TV
Connecting an antenna/cable
Connect the antenna cable to the appropriate antenna
terminal on the back of the TV set as shown below.
Getting started watching your TV
I
O
1
Power
1
a. Turn on the power switch beneath the screen.
b. Press the power button, number keys or channel up / down
button on the remote control.
Setup Wizard
2
The first time you switch on the TV, the Setup Wizard will guide you
to complete the language selection and channel scanning.
Press the OK key to begin the setup process.
Step 1. Select the setup language you prefer.
Step 2. Please select country.
Step 3. Enter the correct time zone using the remote control.
Step 4. Ensure that your co-axial cables are connected
correctly before proceeding.
6
Ofrecido por www.electromanuales.com
1
2
4
Step 5. Scan for digital channels.
Step 6. Select analog TV system.
Step 7. Scan for analog channels.
Step 8. Setup completed. Setup is now complete, you are
ready to begin watching TV.
If you leave the setup process before it is complete,
you will be given a choice of options:
1. Resume setup
2. Resume setup wizard at next startup
1
3. Exit and do not remind me
3
Select an option and press OK to exit.
Changing channels
3
a. Press 0 - 9 on the remote control to select a channel. The
channel changes after 2 seconds. Press ENTER to select
the channel immediately.
b. Pressing the channel ( CH ) up / down button on the
remote control will also change the channel.
Adjusting the volume
4
Adjust the volume level using the ( VOL ) +/- button on the
remote control.
You can also adjust these settings using the front
control panel. Please see "Right panel view" on
page 3 for details.
Setup may vary due to local broadcast differences.
Digital
Analog