Data Signs VMS II Series Gelişmiş Özellikler - Sayfa 3

Radar Data Signs VMS II Series için çevrimiçi göz atın veya pdf Gelişmiş Özellikler indirin. Data Signs VMS II Series 15 sayfaları.

Advanced VMS Computer Functions

To setup the Radar Options on a Sign fitted with an optional Radar Gun supplied by Data Signs, complete

the following steps, as a guide.

Note: Make sure that you have the correct VMS Password set on the VMS COMPUTER before trying to update

the Sign. Refer to "Security Settings" section of the QuickStart guide.

Navigating via the

Once the cursor is on the 'Radar Options', push the

R A D A R

S e t u p

S e t

V i e w

Select the 'Setup Radar' option and push the

1. Select the 'Message Interrupt' option in this instance and push the

•

If 'Disable Radar' was selected then this is the end of the Radar Setup. The Radar Functionality

of the Sign has been Disabled.

•

If 'Radar Only' was selected the Signs' Normal message is NOT shown.

Only when a valid speed is detected by the Radar Gun does the Sign display something, it will

be BLANK at all other times.

•

As the 'Message Interrupt' was selected, the Normal message is shown on the Sign, when

a speed is detected by the Radar, the Sign displays a message or speed depending on other

Radar settings following this selection.

S E T U P

D i s a b l e

R a d a r

M e s s a g e

keys, select the 'Radar Options' menu item from the main MENU.

and

O P T I O N S

R a d a r

L o / H i

R a d a r

R A D A R

O n l y

V M S C O M P U T E R – A D V A N C E D F E AT U R E S

button. The following screen(s) will be displayed

M S G

S e t u p

button.

R a d a r

I n t e r r u p t

p g

button.