DURKOPP ADLER 550-867 Ek Talimatlar - Sayfa 15

Dikiş Makinesi Aksesuarları DURKOPP ADLER 550-867 için çevrimiçi göz atın veya pdf Ek Talimatlar indirin. DURKOPP ADLER 550-867 20 sayfaları. Btsr sensor

Sayfayı Yazdır
DURKOPP ADLER 550-867 Ek Talimatlar
Fitting the new parts
3. If the position is NOT correct, the thread guide will have to be bent
Abb. 16: Bending the thread guide
4. Bend the thread guide using a pair of pliers in the upper left area (3).
5. Bend the thread guide back again afterwards in the right-hand area (4)

5.2 Installing the BTSR sensor

Abb. 17: Installing the BTSR sensor
1. Fit the nut (3), washer and screw of the BTSR sensor.
2. Tighten the nut (3) with a 7 mm wrench.
Additional Instructions 550-867 - 01.0 - 08/2017
slightly.
③
(3) - Upper left area
if necessary.
③
(3) - Nut
(4) - Right area
④
13