DURKOPP ADLER 767 - Talimatlar Kılavuzu - Sayfa 9

Dikiş Makinesi Aksesuarları DURKOPP ADLER 767 - için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. DURKOPP ADLER 767 - 16 sayfaları. Converting bobbin hook clb 300
Ayrıca DURKOPP ADLER 767 - için: Kullanım Kılavuzu (18 sayfalar), Kurulum Talimatları Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Umbauanleitung für Bobbinengreifer CLB 300

Instructions for converting bobbin hook CLB 300

General information

1.1

Scope of delivery

Conversion

2.1

Disassembling the components / Inserting the bobbin

2.1.1

Class: 767-FAS-573

Änderungsindex

Ausgabe/Edition:

03.2007

Rev. index: 0.0

767-FAS-573 & 767-AE-5-73

A conversion to the bobbin hook CLB 300 is possible with the

class 767-FAS-573 and 767-AE-5-73.

With class 767-AE-5-73 machines, delivered before January 1st,

2007, the rigid foot 0767 220143 (01.0) must be used.

On request: Slide 0767 140143 with sight glass for thread monitoring.

Before proceeding with the conversion task:

Please make sure that you have all components of the kit.

The complete kit for the transformation of the bobbin hook with the

order no.: 0767 150754 consists of the following components:

1x Hook

1x Manual

On request

1x Slide (with sight glass)

Attention! Risk of injury !

Turn the main switch off and remove the plug before starting

the conversion.

The transformation may only be performed by qualified

technicians.

–

Remove the slide.

–

Remove the counter knife.

–

Remove the thread-pulling knife.

–

Remove the throat plate.

–

Feed dog; remove the front screw and push it to the side.

–

Loosen the hook fastening screws and remove the hook.

–

Insert the CLB-hook, tighten the fastening screws (first

screw in the direction of rotation on the flat spot).

Printed in Germany

Teile-Nr./ Part-No.:

0791 767774

0767 150754

0791 767774

0767 140143

Blatt: 9

von 16

Sheet:

from