DURKOPP ADLER 867 Talimatlar Kılavuzu - Sayfa 6

Dikiş Makinesi Aksesuarları DURKOPP ADLER 867 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. DURKOPP ADLER 867 8 sayfaları. Remaining thread monitor
Ayrıca DURKOPP ADLER 867 için: Talimatlar Kılavuzu (16 sayfalar), Talimatlar (4 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Ek Talimatlar (18 sayfalar), Ek Talimatlar (20 sayfalar)

Sayfayı Yazdır
DURKOPP ADLER 867 Talimatlar Kılavuzu
Klasse 867 Anbauanleitung Nahtmittenführungen
N800 005655 (mechanisch) N800 005650 (pneumatisch)
Class 867 Instructions for fitting seam center guide
N800 005655 (mechanical) N800 005650 (pneumatically)
3.
Pneumatical seam center guide
3.1 Contents of the set of parts
The complete mounting kit for fitting the pneumatical
seam center guide with the order no. N800 005650
consists of the following components:
1 x
0667 105164
1 x
0667 595050
2 x
1001 009243
2 x
9202 002107
1 x
9204 211997
1 x
9205 102778
1 x
9217 000157
1 x
9231 110127
3 x
9330 000087
1 x
9700 100040
1 x
9710 920013
1 x
N800 005614
1 x
N800 005615
1 x
9840 120026
1 x
9204 201667
1 x
0867 590064
- 9870 867005
- 9815 301082
- 0797 000317
(Attention: Solenoid valve non-energised open)
Variant: Integrated seam center guide
in the presser foot for class 867
with E24/... / ... mm stitch length.
3.2 Mounting the seam center guide on the sewing head
–
Remove the head cover.
–
Mount new head cover 0667 105164.
–
Screw pre-assembled seam center guide with holder 2 on the
head cover and place the discs 1
into the recesses of the head cover and between the holder 2.
–
screw the pneumatic hose with the fastening clamp on the
head cover and guide it to the back (see ill.).
Fasten it at the cable harness with cable ties and guide it to the
maintenance unit. Take care that the hose is not bent.
Ausgabe/Edition:
05. 2006
Head cover
Holder
Disc
Cylinder head screw (M4x20)
Flat headed screw (M5x16)
Threaded pin (M8x8)
Wing screw (M4x16)
Hexagonal nut (M6)
Disc (A4,3)
Cylinder, single
Throttle valve
Stop guide
Thrust piece
Fastening clamp
Oval head screw (M4x10)
Pneum. connection cpl.
Cable k, for solenoid valve
Push button
Solenoid valve
Printed in Federal Republic of Germany
1
2
Teile-Nr./ Part-No.:
0791 867701
Blatt:
von
Sheet: 6
from 8