DURKOPP ADLER H-TYPE Series Ek Talimatlar - Sayfa 16
Dikiş Makinesi Aksesuarları DURKOPP ADLER H-TYPE Series için çevrimiçi göz atın veya pdf Ek Talimatlar indirin. DURKOPP ADLER H-TYPE Series 18 sayfaları. Instructions for replacing the winder
Sayfayı Yazdır
Fig. 19: Assembling the new tensioning plate
(14) - Cable push button panel
(16) - Connecting cable
17. Use the black plug to insert the cable of the push button panel (14) into
18. Use the white plug and the brown plug to connect the connecting
19. Place the belt cover back on and fix it in place with 4 screws.
20. Assemble the handwheel and fix it in place with 3 screws.
21. Tighten the right arm cover with 5 screws while reconnecting the lifter.
22. Re-tighten the left arm cover using 5 screws.
23. Plug the power cable back in.
24. Switch on the machine.
The machine is ready for sewing.
14
⑭
the matching slot on the circuit board.
cable (16) that supplies power to the winder via the control to pin 8 (18)
and pin 10 (19), respectively, of the X22 terminal strip on the circuit
board.
Assembling the new tensioning plate
(18) - Pin 8 (24V)
(19) - Pin 10 (0V)
Additional Instructions H-TYPE - 00.0 - 09/2017
⑲
⑱
⑯