DURKOPP ADLER 550-867 Ek Talimatlar - Sayfa 10

Tarayıcı DURKOPP ADLER 550-867 için çevrimiçi göz atın veya pdf Ek Talimatlar indirin. DURKOPP ADLER 550-867 20 sayfaları. Btsr sensor

Replacing the thread tension PCB

Abb. 8: Pulling off the plug

⑥

(6) - Plug

Inserting the PCB

1. Remove the new PCB from its antistatic bag.

2. Connect the plug (6) to the PCB.

3. Tighten the screws (6) on the plugs.

4. Screw the PCB (5) onto the stud bolts.

5. Tighten the PCB (5) to the stud bolts using the 4 screws (7).

Abb. 9: PCB packed in antistatic bag

Additional Instructions 550-867 - 01.0 - 08/2017