DUROFIX RZ4012 Bilgi Kılavuzu - Sayfa 7

Elektrikli Alet DUROFIX RZ4012 için çevrimiçi göz atın veya pdf Bilgi Kılavuzu indirin. DUROFIX RZ4012 17 sayfaları. Oil pulse tool

g. Use power tools only with specifically designated battery packs. Use of any

other battery packs may create a risk of injury and fire.

h. When battery pack is not in use, keep it away from other metal objects, like

paperclips, coins, keys, nails, screws or other small metal objects that can

make a connection from one terminal to another. Shorting the battery

terminals together may cause burns or a fire.

i. Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected from the battery may cause

irritation or burns.

j. Do not use a battery pack or tool that is damaged or modified. Damaged or

modified batteries may exhibit unpredictable behaviour resulting in fire,

explosion or risk of injury.

k. Do not expose a battery pack or tool to fire or excessive temperature.

Exposure to fire or temperature above 130 °C may cause explosion. NOTE The

temperature „130 °C" can be replaced by the temperature „265 °F".

l. Follow all charging instructions and do not charge the battery pack or tool

outside the temperature range specified in the instructions. Charging

improperly or at temperatures outside the specified range may damage the battery

and increase the risk of fire.

Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

Tool service must be performed only by qualified repair personnel. Service or

maintenance performed by unqualified personnel may result in a risk of injury.

When servicing a tool, use only identical replacement parts. Follow instructions

in the Maintenance section of this manual. Use of unauthorized parts or failure to

follow Maintenance Instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES AND SYMBOLS

CAUTION

Hold tool by insulated gripping surfaces when performing an operation where

the cutting tool may contact hidden wiring. Contact with 'live' wire will also

make exposed metal parts of the tool 'live' and shock the operator.

Be aware that this tool is always in an operating condition, because it does not

have to be plugged into an electrical outlet. Always set the trigger switch to the

locked OFF position when installing or removing the battery pack or bits.

Do not use bits or sockets larger than those recommended. Large bits or drills

may overload the wrench/driver and damage the motor and gears.

SERVICE