Data-Tronix DT-QAM-ENCMOD-8 Kullanıcı Kılavuzu - Sayfa 6

Modülatör Data-Tronix DT-QAM-ENCMOD-8 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Data-Tronix DT-QAM-ENCMOD-8 20 sayfaları.

Front Panel View

1. PWR Indicate power on.

2. RUN The light will keep flashing when system is on.

3. CH1-CH8

4. DEFAULT - Press for 10 seconds to restore the encoder to the factory setting

(Like the network setting and PID settings).

5. NMS - Net management system port

[IP:192.168.1.30; USER NAME: user ; PASSWORD: user]

Rear Panel View

1. HD INPUT PORTS: Feed the HDMI signals into the modulator. The HD port

2. RF OUT: 40dBmV maximum output is provided at this port

3. TEST: Output level read at this point will be down 20dB from the actual output

4. POWER CORD: 12V 5A power source

5. ON/OFF SWITCH: Turns the unit on or off

6. GDN: For modulator grounding

WARNING:

For the protection of your equipment and its proper working, it is necessary to connect

the DT-QAM-ENCMOD-8 to a ground connection.

DT-QAM-ENCMOD-8 Manual