DataBay DVS- AR Kullanıcı Kılavuzu - Sayfa 15
Genişletici DataBay DVS- AR için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DataBay DVS- AR 20 sayfaları. Cat5 dvi-d + audio extender family
Sayfayı Yazdır(5) Turn on your DVI output device and monitor to confirm the function
of display. The "LINK" LED of the transmitter should turn orange to
reflect the connection of a local DVI monitor and the "ACTIVE" LED
should turn blue to indicate an activated DVI-D signal.
(6) The transmitter has built in an EDID simulator, when you connect
local DVI monitor, the transmitter will automatically record the EDID
from DVI monitor. When you not connecting DVI monitor locally,
the transmitter will simulate the EDID communication like a regular
monitor and activate the DVI signal of PC.
DVI+Audio Output x 1
(Local Display)
3. To connect monitors and speakers through RJ-45 and RJ-11 ports:
(1) You can refer to previous section for Receiver to install and prepare the
cable to be connected.
(2) RJ-45 VIDEO with Short Range Receiver DVS-DR: The RJ-45 ports
in the back of Transmitter can only support DVI-D signal. For each
connector, please prepare one Cat5/5e/6 cable and make the cable
as 568B/568B type [more details about Cat5/5e/6 cable, please refer
to previous section of 1. () ~ (6)], and plug one end of the cable to
the "RJ-45 VIDEO" port and the other end to the "RJ-45" port of DVS-
DR and connect "DVS-DR" to the DVI monitor. If the video connection
is HDMI type, you will need to use appropriate DVI-HDMI adaptor to
connect. The supported DVI-D resolution and distance is similar to
using regular DVI cable, the estimated ranges are: 800x600@20m,
104x768@15m, 180x104@10m. Previous range can be applied
in most of the application, but in some cases it might change. It will be
appropriate to test the capacity of display before installation.
Local Connection of Multi-Port Transmitter
DVI+Audio cable
DVI
Audio
15