Addtron Technology Netphone KE1021A Kullanıcı Kılavuzu - Sayfa 4

IP Telefon Addtron Technology Netphone KE1021A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Addtron Technology Netphone KE1021A 15 sayfaları. Addtron technology netphone ke1020a/ke1021a user's manual

Sayfayı Yazdır

Figure 2——Side View

1——RJ-45 input port

2——RJ-45 output port

[KE1020A does not have this port]

3——Power Port

4. Character Strings

Corresponding Keys:

Key

. ,' ？！" 1 -

a b c 2 A B C 2

d e f 3 D E F 3

g h i 4 G H I 4

j k l 5 J K L 5

m n o 6 M N O 6

p q r s 7 P Q R S 7

t u v 8 T U V 8

w x y z 9 W X Y Z 9

( ) @ 0 - * &

If you need to enter alphabetic characters or a numeric sequence then press the corresponding key above

repeatedly until the character you require is displayed.

Only when you key in the 'Local IP', 'Subnet Mask', 'Router IP','DNS1' and 'DNS2' you should use the '*' key

for the dot.

IMPORTANT NOTE: If the next character you want to type needs to be input using the same key then you must

press '#' to confirm the last entry before you can generate the next character. For example: To enter 'Damon',

press '3333326#666#66#'. ("m", "o" and "n" are all entered using '6' key so you must press '#' to confirm the last

letter before you can generate the next character)

5. Installation and Settings

5.1 Installation

（1） Place your Netphone-KE1020A/KE1020A near a power outlet.

（2） Plug the RJ-45 connector of the Ethernet 10/100Base-T cable into the Netphone-KE1020A/KE1020A's

side input port①,and plug the other side into a hub or switch, or wall/ground socket of the structuring

cable.

（3） Plug the accessory power-adapter into the power outlet, then connect the output-plug to power-port ③

of the Netphone-KE1020A/KE1020A.

NOTE: If the network is without a HUB, the Netphone-KE1020A/KE1020A should be connected with other

Ethernet equipment (such as XDSL adapter, CABLE modem or PC) by crossing-over cable. Otherwise the

direct-connecting cable is applied.

Characters