4IPNET EAP110 Hızlı Kurulum Kılavuzu - Sayfa 9
Kablosuz Erişim Noktası 4IPNET EAP110 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. 4IPNET EAP110 15 sayfaları. Enterprise access point
Getting Started
4ipnet EAP110 supports web-based configuration. Upon the completion of hardware installation, EAP110 can
be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or Internet Explorer version
6.0 and above.
The default values of LAN IP address and subnet mask of EAP110 are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Steps:
1. To access the web management interface, connect the administrator PC to the LAN port of EAP110 via
an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP110 in TCP/IP of your
PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of EAP110 (https://192.168.1.1) at the
address field ("https" is used for a secured connection), and then press Enter.
Example of entering EAP110'sdefault IP Address via a web browser
3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,
and then click Login.
Copyright © 4IPNET, INC. All rights reserved.
Administrator Login Page
5
Quick Installation Guide
Quick Installation Guide
Quick Installation Guide
Quick Installation Guide
EAP110 Enterprise Access Point
ENGLISH