DataCard Attacher GV500 Veri Sayfası - Sayfa 2

Yazıcı Aksesuarları DataCard Attacher GV500 için çevrimiçi göz atın veya pdf Veri Sayfası indirin. DataCard Attacher GV500 2 sayfaları. Datacard attacher gv300 print finishing system: data sheet
Ayrıca DataCard Attacher GV500 için: Veri Sayfası (2 sayfalar)

Sayfayı Yazdır

DATACARD

ATTACHER

PRINT FINISHING SYSTEM

Specifications

Carrier sheet

• Width: 4.5 in. to 20.0 in. (114.0 mm to 508.0 mm)

• Length: 4.5 in. to 17.0 in. (114.0 mm to 432.0 mm)

• Thickness: 60 gsm to < 0.125 in. (3.0 mm) (product dependent)

Width is measured across the belt. Length is measured in the running direction. Perfect bound

stock will not feed.

Throughput

Up to 28,000 carriers or documents per hour.

Vacuum transport

Perforated moving vacuum belt transports the carrier document in register while it undergoes

bases/modules

additional processing. Each transport has three mounting positions to accept a feeder or other

components. Feeders and components can be interchanged.

Maximum

Four (4) fully functional modules that can be configured with any option and one (1) non-driven

modules/bases

module. Non-driven modules can accept folding components, hot melt glue systems, labeling heads

or continuous inkject printing options.

Infeed table

Stock shingled on long table and fed by vacuum wheel into aligner section. Extended infeed table

(extended)

is the only option.

Aligner module

Separates the product, aligns and registers it, then transports it to the vacuum belt of the next

module. A double detect can be fitted here.

Divert/reject

Diverts stock that does not meet preset specifications, such as a mismatched carrier and card.

Delivery

Shingle delivery table at the end of the system shingles stock. Overlap is operator-adjustable.

Automatic batch counter separates stock at a pre-determined number.

Finishing Options

Feeders

• VF-III feeder:Versatile feeder handles a variety of items

• VF-II/ES feeder: Extended-size version of the VF-III feeder

• CR80 card feeder: Feeds plastic cards

• Card feeder/ME: Card feeder with top and bottom magnetic stripe encoding capability

• Rotary feeder: Feeds three-dimensional items, such as coins and keys

• Rotary pick-n-place: Affixes items such as 3D objects, CDs/DVDs, magnets and secure tags

Gluing

Choice or combination of mechanically driven pattern gluer, extrusion system for cold glue or

hot-melt system.

Folders

Fold components can be mounted on any vacuum transport to make a plow fold, and can be

interchanged with feeders and opening components. A vacuum transport equipped with two plow

folding components will make a V, C, Z or roll-fold. A cross-fold option is also available.

• Minimum fold: 0.75 in. (19.0 mm)

• Maximum fold: Depends on fold type

Scoring

Lineal scoring for a variety of paper stock. Plow folding requires prescoring or inline scoring.

Personalization

Continuous inkjet and UV-curable Drop-on-Demand inkjet options, as well as magnetic encoding,

are available to personalize the carrier and items attached to the carrier.

Match verification

Verifies the match of card to carrier, using one or more of the following technologies: OCR, bar

code, magnetic stripe, 2D bar code.

Read/print

Reads preprinted bar codes or magnetic stripes, performs database lookup and/or drives an inkjet

printer to personalize documents.

Turning (90º)

Rotates documents 90º for finishing.

Windowing/patch

Feeds film, preprinted paper or Post-It Note

application

at a timing mark), and applies it to the carrier. Patch sizes range from 2.0 x 2.0 in. (50.8 x 50.8 mm)

to 11.0 x 12.0 in. (279.4 x 304.8 mm), within a placement tolerance of ±0.0625 in. (1.5875 mm)

Page opening

Left and/or right components open flaps or prefolded documents, such as brochures, letters,

signatures, greeting cards, mailers and folding cartons.

Label application

Applies labels for scratch-off activation, direct mail packages and other applications.

System Requirements

Power supply

480VAC (transformers required for other voltages)

Compressed air

100 psi

Dimensions

Width: 89.0 in. (2.3 m); Length varies according to configuration

GV500

stock from a roll, cuts it to the required length (or

Datacard St. Louis

11640 Adie Road

St. Louis, MO 63043

+1 314 576 2007

+1 314 576 5801 FAX

Datacard Group

Corporate Headquarters

11111 Bren Road West

Minnetonka, MN 55343-9015

+1 952 933 1223

www.datacard.com

Datacard and Attacher are registered trademarks,

trademarks and/or service marks of DataCard

Corporation in the United States and/or other

countries. Names and logos on sample cards are

fictitious. Any similarity to actual names, trademarks

or tradenames is coincidental. Post-it is a trademark of

3M Company.

CD8-4109