4IPNET EAP200 Hızlı Kurulum Kılavuzu - Sayfa 9

Kablosuz Erişim Noktası 4IPNET EAP200 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. 4IPNET EAP200 15 sayfaları. Enterprise access point

Sayfayı Yazdır

Getting Started

4ipnet EAP200 supports web-based configuration. Upon the completion of hardware installation, EAP200 can

be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or Internet Explorer version

6.0 and above.

The default values of LAN IP address and subnet mask of EAP200 are:

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

Steps:

1. To access the web management interface, connect the administrator PC to the LAN port of EAP200 via

an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP200 in TCP/IP of your

PC, such as the following example:

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

2. Launch the web browser on your PC by entering the IP address of EAP200 (http://192.168.1.1) at the

address field, and then press Enter.

Figure 5 Example of entering EAP200'sdefault IP Address via a web browser

3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,

and then click Login.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

EAP200 Enterprise Access Point

Quick Installation Guide

ENGLISH