Datacold 600 R Hızlı Başlangıç Kılavuzu

Ölçüm Cihazları Datacold 600 R için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Datacold 600 R 2 sayfaları.

Sayfayı Yazdır
Quick Start Guide
DISPLAY DESCRIPTION
T1 T2 T3 T4 T5 T6
Alarm activated
Temperature inputs
Rotating display
of each T°
inputs with
sensor name
Menu :
Keyboard
each menu choice is available via
the corresponding key
To enter the PIN code, use the four keys as following figures.
1
2
3
TO OBTAIN PRINT OUT
 - Press the BLUE Key (
) several times to select the print needed:
 DELIVERY TICKET: "CURRENT VALUE"
 JOURNEY TICKET: "NUMERICAL TICKET" or "GRAPHICAL TICKET"
 HISTORICAL TICKET
Printing starts 4 seconds after having selected the print needed.
To cancel the print, press the RED KEY
The printing of temperatures data depends of the print parameter set in the print menu.
Please, tear paper only when printing has stopped to avoid damage to the printer mechanism.
TO REPLACE PAPER ROLL
If a coloured line appears on the last meter of paper, the paper roll needs to be replaced as follows:
Carrier Transicold Europe PROPRIETARY & CONFIDENTIAL
Status of digital inputs :
Door
 
Defrost on/off
 
Refrigeration
Day, date and time
4
before the 4 second delay.
1.
Pull on the window of the
printer module to open the
printer front
3.
Insert a new paper roll
and push on the printer
front to close it
ACCESS TO PRINT MENU
1.1 Select compartment to print
1.2 Time zone offset for printing
1.3 Print report events
1.4 Print report parameters
1.5 Historical ticket
1.6 Delivery ticket setting
1.7 Print time period
1.8 Day start time
1.9 Day end time
- Press the BLUE Key (
- For settings:
1.
Select the desired item by pressing the BLUE Key (
2.
Select the desired item by pressing the GREEN Key (
3.
Set the parameter needed by using the BLUE Key (
4.
Press the GREEN Key (
5.
To exit, press the RED KEY (
- For printings:
1.
Select the desired item by pressing the BLUE Key (
2.
Press the GREEN Key (
Printing starts after 2 seconds after having confirmation.
Feb-15
2.
Pull the printer module carefully
forwards.
4.
Place the printer module carefully
back into the recorder.
Print Menu list
Item
Function
Setting
Setting
Printing
Printing
Setting
Setting
Setting
Setting
Setting
) for 4 seconds to access to the print menu.
) or the YELLOW Key (
).
) or the YELLOW Key (
) to confirm the setting.
) to return at default display.
) or the YELLOW Key (
).to confirm the print.
TEC_QSG_DataCOLD 600_Rev-_ENG
).
).
).
1/2