4IPNET EAP737 Hızlı Kurulum Kılavuzu - Sayfa 16

Kablosuz Erişim Noktası 4IPNET EAP737 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. 4IPNET EAP737 18 sayfaları. Enterprise

Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)

To extend the wireless coverage, EAP737 supports WDS links on each RF card for connecting wirelessly to

other WDS-capable APs (peer APs). By default, all WDS profiles are disabled.

 Click on the Wireless button on the main menu.

 Select the Repeater Settings tab.

 Choose WDS as the Repeater Type.

 Choose the desired WDS profile:

(a) Enable WDS.

(b) Enter the Remote AP MAC Address (peer AP) and then Click SAVE.

If you are using another EAP737 as the peer AP, simply repeat the above-mentioned steps to configure

another peer AP(s).

On each and every configuration page, you may click SAVE to save the changes of your configured

settings, but you must reboot the system for the changes to take effect. After clicking SAVE, the



Note:

following message will appear: "Some modifications have been saved and will take effect after

APPLY."

EAP737 Enterprise Access Point

Quick Installation Guide

ENGLISH