DataComm Electronics Easy Mount Series Talimat/Kurulum Sayfası - Sayfa 2

Muhafaza DataComm Electronics Easy Mount Series için çevrimiçi göz atın veya pdf Talimat/Kurulum Sayfası indirin. DataComm Electronics Easy Mount Series 2 sayfaları. Cable plate with flexible opening, 1-gang

Sayfayı Yazdır
Parts Included
1. Cable Plate with Flexible Opening, 2-Gang
Use the Cable Plate with Flexible Opening to install low voltage cables behind
your flat panel TV, (see Figures 2 & 3), your amplifier or other audio and video devices.
This wall plate is designed for use with Low Voltage / Data Cables "ONLY".
The Cable Plate with Flexible Opening is designed with the low voltage mounting brackets
molded to the back of the plate (see Figure 1).
Determine the location of your flat panel TV, amplifier or audio/video device. Use the
enclosed template to cut a hole in the drywall. When cutting the hole in the drywall, allow
for the location of the stud. Now simply pull your audio/video cables through the wall and
through the opening in the Cable Plate with Flexible Opening. Now insert the Cable Plate
with Flexible Opening flush into the wall. Next, screw down the wall plate screws with
wings. The wings will fasten tightly against the back of the drywall (see Figure 3) and
your installation is complete.
This Cable Plate with Flexible Opening is Designed for Use with
Low Voltage / Data Cables "ONLY".
Do Not Run or Pull the TV Cord or Other Electrical Cords Inside the Drywall.
National Electrical Code (NEC) Does Not Allow the Installation of the TV Power Cord or an Extension Cord Behind the Wall.
CAUTION
 Never install low voltage wiring during lightning storms.
 Never install low voltage wiring in wet locations unless the wire is specifically designed for wet locations.
 Never touch un-insulated low voltage wires or terminals unless the wire has been disconnected at its source.
 Use caution when installing low voltage cables.
IMPORTANT INSTRUCTIONS
 Read and understand all instructions.
 Follow all warning and instructions marked on the product.
 Do not use this product near water, for example near a bath
tub, wash bowl, kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
 SAVE THESE INSTRUCTIONS.
Flat Screen TV
Surge Protector
Figure 3 - Back View
Concealed Low Voltage Wiring
(hidden in wall)
Receiver
Surge Protector
Instruction / Installation Sheet
DataComm Electronics Easy Mount Series
45-0015 Cable Plate with Flexible Opening, 2-Gang
Tools Needed
1. Drywall saw
. 2
6
F
. t
a t
p
e
m
3. Pencil
4. Screwdriver
Figure 2 - Front View
Concealed Low Voltage Wiring
(hidden in wall)
Receiver
Flat Screen TV
e
a
s
u
e r
4
Figure 1
Using
Template,
Cut a Hole
in the Drywall
Cable Plate with Flexible Opening
CUT ALONG DOTTED LINE 
This product is patent protected by U.S. Patent number 7495171. RoHS Compliant.
5
0 -
0
1
5
–
F
o r
t n
V
e i
w
4-5/16"
TEMPLATE
45-0015
2-Gang
ACTUAL SIZE
4
5
0 -
0
1
5
–
B
a
c
k
V
e i
w
Low Voltage
Mounting
Bracket Wings