Elsat iNode Kullanım Kılavuzu - Sayfa 7

Alıcı-Verici Elsat iNode için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Elsat iNode 15 sayfaları. Serial transceiver usb

iNode Serial Transceiver USB – instruction manual

ELSAT s.c.

The picture below shows the Firmware tab:

Current firmware version field shows the version and creation date of the firmware in the device.

To change the firmware in the device first select New firmware file.

Firmware is uploaded to the device after clicking Send firmware button. Application checks if this

firmware is correct for this type of device to avoid situation that we want to upload the firmware

which needs the button to be pressed for broadcasting in the device but this device doesn't have it.

The fep files with the firmware, manuals or other information you can find at our technical support:

http://support.inode.pl/

user: inode no password.

All iNode devices use to communication the Bluetooth 4.0/4.1 standard. More information about it

you can find at

https://www.bluetooth.org/en-us/specification/adopted-specifications

The data structure is described in Core_V4.0.pdf: Volume 2 Part E, Section 5.4.

When connection with remote BLE device is established, communication with them is performed

using the Attribute Protocol encapsulated in HCI ACL DATA packets. The followings PDUs

(Core_V4.0.pdf: Volume 3 Part F) can be used – see table below. Asterisk in Imp column means

that that attribute is implemented in iNode Serial Transceiver USB.

page 7