Durston Tools 1312 Talimatlar Kılavuzu - Sayfa 6

Elektrikli Alet Durston Tools 1312 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Durston Tools 1312 12 sayfaları.

Cutting the Coil

Place your coil of wire in the coil holder. Use the

deepest channel so that the coil just stands

proud of the top of the channel. Apply Durston

Lubricant (or burr lube) along the top of the coil.

Push the coil up to the stop pin.

Attach the lid. Press the lid onto the coil and

hand tighten the screws evenly so that the lid

just starts to arch.

It can be helpful to place a small piece of

wooden dowel (trimmed to the outer diameter

of the coil) between the coil and the stop pin.

Place the coil holder firmly in a vice so that the

coil in the holder is closest to your body.