Elsema INTELLIGENT SLIDER iS1500LV Kullanıcı Kılavuzu - Sayfa 5

Kapı Açıcı Elsema INTELLIGENT SLIDER iS1500LV için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Elsema INTELLIGENT SLIDER iS1500LV 8 sayfaları. High speed sliding gate opener with battery back-up

Limit Switch Adjustment
The limit sensor has a + marking indicating the centre of the sensor. Adjust the sensor
so that the + marking is in the centre of the magnet on the gear rack.
The 2 x limit magnets should have different marking on them. One should have a
and the other should have a
same marking. The magnets can be installed on either side (open or close). Please see
the diagram below to locate the marking on the magnets.
When steel gear rack is used (or gear rack which are much slimmer), you will have to use
the packing block which comes with the limit switches. Please see the diagram below.
. You cannot use the limit magnets if they have the
Polarity
Marking
5