Elsema Intelligent Slider iS500Solar Kullanıcı Kılavuzu - Sayfa 5

Kapı Açıcı Elsema Intelligent Slider iS500Solar için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Elsema Intelligent Slider iS500Solar 12 sayfaları. Sliding gate opener

Sayfayı Yazdır

1.3 Installation

A. CHECKS BEFORE INSTALLATION

Before proceeding with the installation check the following:

1. The structure of the gate should be suitable for automation.

2. The gate should be supported by upper guides.

3. Mechanical end stoppers must be provided to prevent the gate from running off the track.

4. The foundation should be strong enough to support the operator.

5. There are no cables or pipes in the path of the operator and the gate.

6. Be sure that gate moves freely.

7. There are no obstacles in the moving gate area.

8. The operator is not in a position where it can be easily or accidently damaged by passing

vehicles.

B. INSTALLATION

The iS500 should be installed on a flat, horizontal, solid concrete surface.

1. Assemble the base plate bracket as shown in fig 1.

2. Locate the position of the operator by using the dimensions shown in fig 2.1 & 2.2.

Note 1: The motor should be mounted as high as possible. After fixing the gear rack, the motor will be

lowered. See fig 5.

Fig 1

Fig 2.1

iS500 Series, SLIDING GATE OPENER MANUAL

Fig 2.2