Elsema iS300D Kullanıcı Kılavuzu - Sayfa 8

Kapı Açıcı Elsema iS300D için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Elsema iS300D 12 sayfaları. Swing gate opener

F. MOTOR FIXING

While the motor is disengaged, remove the wire cover and fix the rear bracket with the pin. The

pin will slot into the hole with the threaded side up as shown in no.1. No screw is required to

hold the pin in place. Attach the front bracket to the drive unit with the nut provided as shown

in no.2.

Make sure the iS300 is mounted in a horizontal position, especially in these positions:

1) Gate in "CLOSE" position

2) Gate in "OPEN" position

3) Gate at "45° angle" position

Prior to welding the bracket on the gate leaf( if necessary), cover the gate opener to prevent

damages from sparks.

G. WIRE CONNECTION

Avoid tension in the cable during opening and closing cycles

iS300/iS300D/iS300Solar SWING GATE OPENER MANUAL

To connect the iS300 with the control unit

White

Yellow

Motor (+)

Motor (-)