Datakom DKG-205 Kullanıcı Kılavuzu - Sayfa 8

Kontrolör Datakom DKG-205 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Datakom DKG-205 20 sayfaları. Automatic mains failure unit

2.5 Digital Display

This display shows:

- (R) phase voltage, when mains are on

- Alternator frequency, if the generator is on

- Program values in program mode

Below values can be read in sequence by pushing the MENU key in AUTO or

TEST modes:

- (R) phase voltage

- (S) phase voltage

- (T) phase voltage

- (L1) generator phase voltage

- (L2) generator phase voltage

- (L3) generator phase voltage

- (L1) generator phase frequency (engine RPM)

- DC Supply voltage.

MAINS ON: (green) The LED will turn on when all 3 mains phase voltages are

within the limits.

MAINS OFF: (red) The LED will turn on when at least one of the mains phase

voltages are outside limits.

GENERATOR: (yellow) The LED will turn on when all 3 generator phase

voltages are within the programmed limits.

LOAD GENERATOR: (yellow) it turns on when the generator contactor is

activated.

LOAD MAINS: (green) it turns on when the mains contactor is activated.

FUEL: (yellow) it turns on when the (activate before start) fuel solenoid is

activated. This LED is operative even if the fuel output is in 'activate to stop'

mode.

START: (yellow) it turns on when the start relay is activated.

WAITING/COOLING: (yellow) it turns on during wait periods before and

between start attempts, mains waiting period, cooling period and contactor

period.

PERIODIC MAINTENANCE REQUEST: (red) It flashes when the

programmed maintenance period or the programmed engine-hours is

elapsed.

TEST/AUTO/OFF/PGM/MAN: It turns on when the related operation mode is

selected. One of these LEDs is always on and indicates which operation mode

is selected.

- 8 -