Elsema Intelligent Swing iS400D Kullanıcı Kılavuzu - Sayfa 7

Garaj Kapısı Açıcı Elsema Intelligent Swing iS400D için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Elsema Intelligent Swing iS400D 12 sayfaları. Swing gate opener with limit switch

Sayfayı Yazdır

E. MOTOR FIXING

While the motor is disengaged, remove the wire cover and fix the rear bracket with the pin. The

pin will slot into the hole with the threaded side up as shown in no.1. No screw is required to

hold the pin in place. Attach the front bracket to the drive unit with the pin (A) and the set screw

(B) provided as shown in no.2

Make sure the motor is mounted in a horizontal position, especially in these positions:

1) Gate in "CLOSE" position

2) Gate in "OPEN" position

3) Gate at "45° angle" position

Prior to welding the bracket on the gate leaf (if necessary), cover the gate opener to prevent

damages from sparks.

F. WIRE CONNECTION

Avoid tension in the cable during opening and closing cycles

Limit switches are Normally Closed Type.

iS400/iS400D/iS400Solar SWING GATE OPENER MANUAL