Datakom DKM-409 Hızlı Başlangıç Kılavuzu - Sayfa 4
Ölçüm Cihazları Datakom DKM-409 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Datakom DKM-409 6 sayfaları. Network analyser with harmonic measurement and scopemeter
Sayfayı Yazdır
PUSHBUTTON FUNCTIONS
Three buttons on the front panel provide
access to configuration and measurement
screens.
BUTTON
FUNCTION
Previous screen
or
Decrease related value
(configuration mode)
Next screen
or
Increase related value
(configuration mode)
Changes voltage and
current channels for
Available channels:
U12-U23-U31
V1-V2-V3
I1-I2-I3
HELD PRESSED FOR 3
SEC:
enable/disable auto-scroll
function
HELD PRESSED TOGETHER
FOR 3 SEC:
scopemeter display
harmonic display
digital harmonic
display
Clears visual warning
condition if any.
If no warning
condition, enters
configuration mode.
SETTING AUTO-SCROLL MODE
The unit offers the possibility of automatically
scanning of all display screens.
In order to disable auto-
scroll function hold the
SET button pressed for
3 seconds.
When the auto-scroll is enabled, the unit will
switch to the next screen every 5 seconds.
RESETTING VISUAL WARNINGS
In order to enable
auto-scroll function
hold the SET button
pressed for 3
seconds.
In order to reset
visual warnings, hold
both MENU buttons
pressed for 3
seconds.
If no fault conditions
exists this will enable
the configuration
menu.