Elseta IOMOD 4RTD Kullanıcı Kılavuzu - Sayfa 6

Ölçüm Cihazları Elseta IOMOD 4RTD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Elseta IOMOD 4RTD 9 sayfaları. Modbus

Go to Control Panel -> Device Manager;

Select a failing device;

Press "Update driver software"; screen as in Fig. 6.2. should appear:

Select "x86" driver for a 32-bit machine or x64 for a 64-bit machine. If not sure, select a root

folder (folder in which x64 and x86 lay inside, as in Fig. 6.3).

IOMod 4RTD configuration via PuTTY terminal

Configuration of IOMOD device is done through CLI (Command Line Interface) on virtual COM port. Drivers needed for

MS Windows to install VCOM will be provided. To open up CLI simply connect to specific VCOM port with terminal

software (it is advised to use PuTTY terminal software. If other software is being used, user might need to send

<return> symbol after each command). When connected user should immediately see main screen similar to one in

Fig.6.4.

Fig. 6.2. Device driver software update message

Fig. 6.3. Device driver folder content