Cayin HA-300 Kullanıcı Kılavuzu - Sayfa 13
Amplifikatör Cayin HA-300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cayin HA-300 19 sayfaları. Direct heated triode tube headphone amplifier
Sayfayı Yazdır
_Connect to Audio
This section will illustrate how to connect audio equipment to the HA-300 amplifier.
Connect to
Audio Output
Balanced Connector:
This amplifier use XLR connectors that
1.
are commonly used in professional
application for balanced connection.
There are two XLR wiring standards:
2.
European standard: pin 1=Ground,
Pin 2 = COLD, Pin 3 = HOT
American standard: pin 1=Ground,
Pin 2 = HOT, Pin 3 = COLD
This amplifier use American standard.
3.
When connect to audio equipment with
balanced output wired in European, the
playback signal might be in reversed
phase. We advise user to maintain the
phase of the system correctly.
Equipment_
13
Attention to Audio Connection:
Please refer to the manual of associated
1.
equipment whenever necessary.
Do not connect the power cord until all
2.
equipment are properly connected
"R" indicates the right channel; "L"
3.
indicates left channel.
Please make sure all connectors are
4.
securely installed. Bad connection
might cause noise and degrade in audio
performance, or even damaging your
equipment
Please do not tie the power cord, audio
5.
interconnects, and speaker cable
together or run them in parallel because
this will produce
adverse effect on audio
performance
Note: Please make sure
+ and -, left and right are
connected properly.
Bad Connection
Push all the way in