Datalink Systems QBASE 915MHz Kullanıcı Kılavuzu - Sayfa 4
Modem Datalink Systems QBASE 915MHz için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Datalink Systems QBASE 915MHz 17 sayfaları.
Sayfayı Yazdır7.1 INSTALLING / UNINSTALLING QBASE
The following chapter will deal with the installating and the uninstalling of QBase.
7.1.1 Install QBase
1.
QBase is provided by your reseller.
2.
3.
Open
Start QBase
to open the program.
Note: For the connection between QBase and the Trinity via the QBase modem a driver is required.
Visit www.ftdichip.com/Drivers/VCP.htm to install the driver.
MINIMUM SYSTEM REQUIREMENTS
OS
Windows 7 / 8.1 / 10 64bit
CPU-Speed
2.5 GHz or higher (Hyper-threading or Multicore recommended)
RAM
4 GB or higher
Free Disk Space
100 MB
Display
24-bit color depth
Screen Resolution
1600 x 900 recommended or higher at normal size (96 dpi)
Video / Graphic Adapter
64 MB RAM minimum, 256 MB RAM recommended; NVIDIA, AMD, and Intel chipsets supported;
Accelerated graphics card driver; Be sure to use the latest available driver
If you have problems starting QBase, make sure your installation of Microsoft Windows is up to date.
7.1.2 Uninstall QBase
1.
Open the QBase installer and select
2.
Select
Finish
to remove QBase.
Alternative: Uninstall QBase from the program list of the Windows control panel.
Remove
QBase.
7 QBase – ground control station
Trinity user manual | 13