Cayin CS-100CD Hızlı Başlangıç Kılavuzu - Sayfa 11

CD Çalar Cayin CS-100CD için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cayin CS-100CD 15 sayfaları.

Sayfayı Yazdır

number after "P" expresses track total number.

2) After entering all of the track numbers, press the "PROG" button, your selections will be

memorized automatically.

3) Press the

"/"

unit, the memorized program will play.

 To stop program play, Press the " / " button during program playback.

1 During programming, press the "0" button on the Remote Control Unit can cancel all the

memorized program.

Scan (Remote only)

Press "SCAN" button, the display will show "SCAN", the unit will play ten seconds of every track

from No.1 track.

Press the " / " button on the Remote Control Unit to cancel the scan function.

Time (Remote only)

Changes the models of time displayed. The first model is the amount of elapsed time played in the

current track. The second model is how much time is left on the current track. The third mode counts

the time remaining on the entire CD. Simply press the TIME button to switch between these models.

3. Select USB audio

Connect the USB port to the USB port of the computer with the USB cable which must be

according to the USB2.0 specification. the display will shows

In no disc state, press the

the remote control unit to select USB, the display will show "USB", USB input indicator will

turn on.

Select the USB audio device of the computer as CS-100CD Output, and keep it in working state.

Press the

""or""

unit can show the sample frequency. The sample frequency should be 44.1-192kHz.

4.Coaxial input

1) Connect coaxial input terminal to the device which has coaxial output terminal, like CD Players,

with the coaxial cable.

2)Press the

"/"

unit to enter the coaxial input interface. At the moment, the display will shows

3)Press the

""or""

unit can show the sample frequency. The sample frequency should be 44.1-192kHz.

5. Optical input

1) Connect optical input terminal to the device which has optical output terminal, like CD Players,

with the optical cable.

2) Press the

"/"

button on the front panel or press the

button on the front panel or press the "SOURCE" button on

"/"

button on the front panel or press the

"/"

""or""

"SOURCE"

""or""

"SOURCE"

button on the remote control