DataLocker Sentry K300 Kullanıcı Kılavuzu - Sayfa 16

Tuş takımı DataLocker Sentry K300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DataLocker Sentry K300 19 sayfaları. Encrypted keypad mssd with oled screen
Ayrıca DataLocker Sentry K300 için: Dağıtım Kılavuzu (10 sayfalar), İnceleme El Kitabı (10 sayfalar)

Sayfayı Yazdır

1. Password Reset

Trusting the account:

1. Unlock your device and click Settings in the DataLocker Control Panel.

2. Click Zone Builder on the left sidebar.

3. Click Trust This Account. Your account will now show up in the Trusted Accounts box.

Your account is now in the Trusted Zone of computers. Depending on the policy set by your System

Administrator, you may have restricted device access outside of the Trusted Zone or when ofﬂine.

To remove a trusted account, simply highlight the account you wish to remove and click Remove.

Boot Mode

Boot Mode is not compatible when the Sentry K300 is managed by SafeConsole.

Self Destruct

Note: To prevent an accidental Self Destruct a password reset can be done with the help of a

SafeConsole Admin. See

Self destruct functionality is enabled by default on the device and cannot be disabled. After 20

incorrect password attempts, the device will wipe all data and encryption keys. The message

"Incorrect Password", along with the current incorrect password count, will scroll across the screen

each time an incorrect password attempt is made. Press Enter to display device information or

press any other button to return to the password entry screen.

After each 5 consecutive incorrect password attempts, the device will power off. Pressing the Power

button will allow the user to continue entering passwords.

After 17 and 18 consecutive incorrect password attempts, the message "Brute Force detected!

All data will be deleted." will scroll across the screen. After the 19th attempt, the message "Self

Destruct will begin with next failed login" will scroll across the screen.

Once the 20th consecutive incorrect password attempt has been made, the device will display

"Hack detected. All data has been deleted." The device will then power off by pressing any button.

Note: After the 20th incorrect password attempt, all data is wiped from the drive and it will be reset

to factory settings. The drive will need to be reinitialized upon the next use.

Setting Up The Sentry K300 After Self Destruct

Setting up your device after a Self Destruct has been initiated is much like setting up a new drive.

1. Power on the device by pressing the Power button.

2. Device will ask "Initialize the device?" Select Yes, then press Enter.

3. Device will ask "All saved data will be deleted. Continue?" Select Yes, then press Enter.

4. Device will ask "Warning! Verify to Continue?" Select Yes, then press Enter.

5. The device will ask you to plug it in by showing an image of a plugged in device on the screen.

Warning: Do not power off or unplug the device at this step. The device will move to the next

step automatically when it's ﬁnished initializing.

Password Reset

for more information.

Sentry K300 Managed User Guide