Datalogic DS8100A-3002 Hızlı Referans Kılavuzu - Sayfa 10

Barkod okuyucu Datalogic DS8100A-3002 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Datalogic DS8100A-3002 12 sayfaları. Datalogic laser scanner quick reference guide
Ayrıca Datalogic DS8100A-3002 için: Hızlı Referans Kılavuzu (13 sayfalar)

Sayfayı Yazdır
The laser beam can be switched off through a software command (see also the Genius™ Help On-Line).
AVOID EXPOSURE
LASER LIGHT IS EMITTED
FROM THIS APERTURE
CAUTION-CLASS 3B
LASER LIGHT
WHEN OPEN
AVOID
EXPOSURE TO BEAM
Warning and Device Class Label
The laser diodes used in this device are classified as Class 3B laser products according to EN 60825-1
regulations and as Class IIIb laser products according to CDRH regulations. Any violation of the optic parts in
particular can cause radiation up to the maximum level of the laser diode (30 mW at 630~680 nm).
Power Supply
This product is intended to be installed by Qualified Personnel only.
This scanner is intended to be supplied by either a UL Listed power supply marked 'Class 2' or 'LPS', output rated
20 - 30 V dc, minimum 1.5 A or by a UL Listed computer with LPS outputs.
DS8100A-3002 must be supplied by a Class II Power Supply Unit conforming to the EN 60950 safety regulation.
Patents:
This product is covered by one or more of the following patents.
U.S. patents: Re. 36,251; 5,483,051; 5,992,740; 6,177,979 B1; 6,347,740 B1; 6,394,352 B1; 6,443,360 B1;
6,527,184 B1; 6,629,639 B2; 6,688,524 B1; 6,742,710 B2; 7,161,685 B1; 5,028,772; 5,124,538; 5,466,921;
5,548,107; 6,206,289 B1; 6,669,091 B2; 7,000,838 B2.
European patents: 652,530 B1; 789,315 B1; 851,376 B1; 926,615 B1; 959,426 B9; 1,363,228 B1.
Japanese patents: 3,793,585; 4,033,958.
Additional patents pending.
10
LASER RADIATION IS EMITTED FROM THIS APERTURE
Laser Safety Label
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAXIMUM OUTPUT RADIATION 1 mW
EMITTED WAVELENGTH 630~680 nm
TO EN 60825-1:2001
DS8100A-3002 QUICK GUIDE
AVOID EXPOSURE
DATALOGIC S.P.A. Via Candini, 2
40012 Calderara di Reno - Bologna - Italy
Manufactured
Model No.
Serial No.
This product conforms to the applicable requirements
of 21CFR1040 at the date of manufacture.
Device Identification Label
Volt
Amp.