Dusol DS72W Kullanıcı Kılavuzu - Sayfa 5
Solar panel Dusol DS72W için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dusol DS72W 11 sayfaları.
DUSOL Solar Photovoltaic module
MADE IN DUBAI
Once the PV module has been shipped to the installation site, all of the parts should be
unpacked properly with care.
Do not stand or step on the PV module, this is prohibited and there is a risk of damage the
module and cause injury for you.
Only PV modules with the same cell size should be connected in series.
During all transportation situations, please make sure no huge shock for the vehicle or the
modules, as this may damage the module or lead the cell to be crack.
During all transportation situation, never let the module fall down from the vehicle, house or
hands. This will break the cells of the module.
Do not clean the glass with chemicals.
Do not disconnect any of the module when it is under load.
3. Installation
3.1 Installation safety
Always wear protective head gear, insulating gloves and safety shoes (with rubber soles).
Keep the PV module packed in the carton or on the pallet until installation.
Do not touch the PV module unnecessarily during installation. The glass surface and the
frame may be hot. There is a risk of burns and electric shock.
Do not work in rain, snow or windy conditions.
Due to the risk of electrical shock, do not perform any work if the terminals of the
PV modules are wet.
Use insulated tools and do not use wet tools.
When installing PV modules, do not drop any objects (e.g., PV modules or tools).
Make sure flammable gasses are not generated or present near the installation site.
Insert interconnect connectors fully and correctly. Check all connections.
The interconnect cable should be securely fastened to the module frame, Cable support
should be done in a way to avoid the connector from scratching or impacting the back sheet
of the module.
Do not touch the terminal box and the end of the interconnect cables (connectors) with bare
hands during installation or under sunlight, regardless of whether the PV module is connected
to or disconnect from the system.
Do not expose the PV module to excessive loads on the surface of the PV module or twist the
frame.
5