Cayken KCY-520WEQ Kullanım Talimatı - Sayfa 4

Araçlar Cayken KCY-520WEQ için çevrimiçi göz atın veya pdf Kullanım Talimatı indirin. Cayken KCY-520WEQ 16 sayfaları.

SAFETY REGULATIONS

1.Read and understand all instructions. Failure to follow all instructions listed

below may result in electric shock , fire and/or serious personal injur y.

2.Keep bystanders, children and visitors away while operating a power tool. Only

to be operated by qualified person who has read and understand the manual.

3.Don´t expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock .

4.Do not abuse the cord. Never use the cord to carr y the tools or pull the plug fr-

om an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Rep-

lace damaged cords immediately. Damaged cords increase the risk of electric

shock .

5.Keep your work area clean and well lit. Cluttered benches and dark areas invite

accidents.

6.Keep bystanders, children and visitors away while operating a power tool. Dis-

tractions can cause you to lose control.

7.Tool ser vice must be performed only by qualified repair personnel. Ser vice or

maintenance performed by unqualified personnel could result in a risk of injur y.

8.Check that the blade and the blade guard is not damaged or cracked before

starting. Replace the blade or the blade guard if it is exposed to impact or is

cracked.

9.Wear personal protective equipment. Wear safety shoes or boots, protective

gloves, a hard hat, ear protection and eye protection.

10.Remain at a distance from the blade when the engine is running.

11.Never use the machine in upside down way.

12.Make sure that the mains voltage corresponds to the specification given on

the type plate.

1.The use of power supply

Make sure that whether the power supply is equipped with creepage prevention

device.If not,you can buy it by yourself.Please wear rubber shoes and rubber gloves

before operation for sake of safety.

2.Protect the inside of the motor from water

If water comes into the inside of the motor,it will arouse electric shock or burn the

motor.

3.Cool the cutter in the inlet valve

Because superheated saw web's longevity will be short,pay attention to supply

water to the inlet valve in the cutting procedure.In addition,please note that do