4IPNET WHG311 Hızlı Kurulum Kılavuzu - Sayfa 6

Kontrolör 4IPNET WHG311 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. 4IPNET WHG311 12 sayfaları. Secure wlan controller

Hardware Installation

Please follow the following steps to install WHG311:

1. Connect the power to the power socket on the rear panel.

2. The Power LED should be on to indicate a proper connection.

3. Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet

cable to an xDSL/cable modem, or a switch/hub of an internal network. The LED of this port should be on

to indicate a proper connection.

Connect an Ethernet cable any LAN Port on the front panel. Connect the other end of the Ethernet cable to

an administrator PC for configuring the WHG311 system, an AP for extending wireless coverage, a switch

for connecting more wired clients, or a client PC. The LED of this LAN port should be on to indicate a

proper connection.

Quick Installation Guide

WHG311

Secure WLAN Controller

WHG311

ENGLISH