Datalogic Gryphon I GBT4 HC Series Talimatlar - Sayfa 2
Barkod okuyucu Datalogic Gryphon I GBT4 HC Series için çevrimiçi göz atın veya pdf Talimatlar indirin. Datalogic Gryphon I GBT4 HC Series 2 sayfaları. Handheld products cleaning procedure
Sayfayı Yazdır
Gryphon-HC Handheld Products
1. Moisten a soft dry cloth with an approved cleaning agent (see Table 1).
2. Rub the cloth back and forth across the contacts. Use care not to leave any cloth
residue.
3. Use the cloth to remove any dirt near the contacts area.
4. Repeat steps 1-3 using a clean dry cloth.
5. Finish by using another clean dry cloth to remove any residue of the cleaning
agent from the contacts.
©2013 Datalogic, Inc. • All rights reserved. • Datalogic and the Data-
logic logo are registered trademarks of Datalogic S.p.A. in many coun-
tries, including the U.S.A. and the E.U.
www.datalogic.com
Cleaning Procedure
Exterior surfaces and scan windows exposed to spills, smudges or
debris accumulation require periodic cleaning to ensure best perfor-
mance during scanning operations. Contacts on the scanner and the
base should also be cleaned as needed to ensure a good connection.
See below for specific information on how to clean the metal con-
tacts.
Use a soft, lint-free cloth or lens tissue to clean the product. Dampen
it with an approved cleaning agent. Gently wipe all surfaces. A cotton
swab may be used only on hard-to-reach handheld contacts.
Use approved cleaning agents only (see Table 1).
CAUTION
Handheld Contacts
Cradle Contacts
1. Remove the power cable before cleaning the contacts.
2. Moisten a soft dry cloth with an approved cleaning agent (see Table 1).
3. Rub the cloth from one side of the contacts to the other, moving it slowly back
and forth. Use care not to leave any cloth residue.
4. Use the cloth to remove any dirt near the contacts area.
5. Repeat steps 2, 3 and 4 using a clean dry cloth.
6. Finish by using another clean dry cloth to remove any residue of the cleaning
agent from the contacts.
Cordless Models
Do not use abrasive or aggressive cleansing agents or
abrasive pads to clean scan windows, contacts, or
plastics.
Do not spray or pour liquids directly onto the unit.
850006914 (Rev A) October 2013
Page 2