Datalogic Magellan 2300HS Kurulum Talimatları - Sayfa 2

Barkod okuyucu Datalogic Magellan 2300HS için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Datalogic Magellan 2300HS 2 sayfaları. Eas kit

Sayfayı Yazdır
Datalogic Magellan 2300HS Kurulum Talimatları
Peel off the EAS portion of the
4
connector label from the Lower/Back
Enclosure to expose the opening for
the wire.
6
Seat the EAS Wire inside the enclosure in the guides as shown. It may be helpful to use a
toothpick or similar tool to push the wire fully into position within the guides.
Guides
To EAS
System
Guides
Reassemble and remount the scanner as described in the service manual, taking care to
7
ensure the EAS wire remains seated in the guides. Use the other kit contents (EAS Antenna
label and cable tie) at your own discretion to optimize the installation. This completes
these instructions.
(Both models)
R44-2717 (Rev. A)
Feed the loop end of the EAS Wire
5
through the EAS opening, then seat
the rubber grommet in the hole.
(Both models)
EAS Wire
Guides