elsner elektronik P03/3-RS485-WAGO Manuel - Sayfa 2
Hava İstasyonu elsner elektronik P03/3-RS485-WAGO için çevrimiçi göz atın veya pdf Manuel indirin. elsner elektronik P03/3-RS485-WAGO 12 sayfaları. Meteorological station
Sayfayı YazdırDescription
The P03/3-RS485-WAGO meteorological station measures temperature, wind speed and
brightness (eastern, sothern and western sun). It recognizes precipitation and receives
the DCF77 radio signal for date and time.
The meteorological station sends the currently recorded weather data, date and time
every 3 seconds. This data flow can be received and analyzed by an end device such as
SPS, PC or MC. If the DCF signal cannot be received, the data is output approx. every
3.35 seconds.
The P03/3-RS485-WAGO has four connections. Data output is at terminals A and B.
Terminals 1 and 2 are for the power supply (24 V DC). The connections are not
resistant to pole reversal. Connecting them incorrectly will destroy the interface
components.
Technical data
Housing:
Colour:
Mounting:
Protection category:
Dimensions:
Weight:
Ambient temperature:
Operating voltage:
Current:
If switching power supply units are applied, the quality of the radio clock reception may
be influenced.
Data output:
Heating rain sensor:
Measurement range temperature:
Measurement range wind:
Measurement range brightness:
The following standards were referenced with regard to evaluating electromagnetic
compatibility of the product:
EN 60730-1:2000-11 + A11:2002
The product has been tested by an accredited EMC laboratory according to the
abovementioned standards.
2
Meteorological Station P03/3-RS485-WAGO • Version: 11.10.2011 • Subject to technical alterations. Errors excepted.
Plastic material
White / translucent
On-wall
IP 44
approx. 96 x 77 x 118 (W x H x D, mm)
approx. 160 g
Operation -30...+50°C, Storage -30...+70°C
24 V DC
max. 125 mA, residual ripple 10%
RS485
approx. 1.2 W
-30...+50°C
0...70 m/s
0...99 000 lux