CB ELECTRONICS TMC-1-MMP1 Manuel - Sayfa 14
Uzaktan Kumanda CB ELECTRONICS TMC-1-MMP1 için çevrimiçi göz atın veya pdf Manuel indirin. CB ELECTRONICS TMC-1-MMP1 17 sayfaları. Monitor remote
Sayfayı Yazdır
TMC1-MMP1 Monitor Controller
H
D
1
5
C
o
n
n
e
c
t
o
r
(
X
M
o
n
)
H
D
1
5
C
o
n
n
e
c
t
o
r
(
X
M
o
n
)
The XMon connector is available on the TMC-1-MMP1 for the following
Talkback Microphone and Headphone
The TMC-1 provides an analogue Talkback Microphone with preamp and Headphone
connection which are connected to the HD15 connector. To use connect to Analogue
Inputs and outputs on the MMP1.
The TMC-1 is designed for systems that sum the two mic inputs and then have two separate
routings both of which are available to each input. To achive this the talkback routing MUST
be setup on the TMC-1 as this overrides the talkback routing in the MMP1.
Internal Talkback Microphone
An electret mic amplifier is provided on the TMC-1, normally connected to the internal
microphone. A 3.5mm Jack on the rear is provided to that a suitable external "Laptop Mic"
may be used. The mic output is on the HP15 pin connector and may be configured with a
balanced or unbalanced output.
Headphone Jack
The headphone jack is connected directly to the HD15 pin connector. The input is
unbalanced with two ground returns.
© 2016 CB Electronics
14
Version 0.0