Elson EBW25 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 3
Su Sebili Elson EBW25 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Elson EBW25 17 sayfaları. 2.5 litre boiling water dispenser
Sayfayı Yazdır
COMPONENT CHECKLIST
Before commencing installation check that all the following components have been sup-
plied with your Elson heater.
•
Wall mounting bracket
•
No.12 x 2" screws (2 off)
•
No.8 x 1" screw (1 off)
•
No.12 x 2" wall plug (2 off)
•
No.8 x 1" wall plug (1 off)
•
15mm x 15mm straight push-fi t connector (fi tted)
•
15mm x 15mm 90 ° elbow push fi t connector (fi tted)
TECHNICAL SPECIFICATION
CONNECTIONS
Inlet connection -15mm ext. diameter
Water entry point - bottom and rear
Cable entry point - bottom and rear
ELECTRICAL
Model numbers
2.5kW - Elson EBW25 - 93 200 001
Electrical rating
Nominal capacities
Weight (full)
Rated pressure
Minimum supply pressure 0.05MPa (0.5 bar)
Maximum supply pressure 1.0MPa
Enclosure rated
Nominal commissioning times (minutes) to temperature ready
Model EBW25
STANDARDS AND APPROVALS
Complies with the requirement of EN 60335-2-35.
Nemko approved for electrical safety.
Complies with European Community Directives (CE).
Complies with UK water regulations, kiwa approved.
2.3/2.5kW@230/240V
Model EBW25
Model EBW25
(10 bar)
IP X2
16
2.5 litres
8.4kg
3
3