CB Sky MD318 Montaj Talimatı - Sayfa 3

Davullar CB Sky MD318 için çevrimiçi göz atın veya pdf Montaj Talimatı indirin. CB Sky MD318 4 sayfaları. 5 piece drum set

Assembly Instructions

Step 1

Fit the front and rear drumheads. Adjust

each one of the tension rods with the key

until all wrinkles are gone.

Step 2

Insert the beater into the bass drum pedal

and secure it with oval nut. Insert the bass

drum legs into the mountings and adjust

the height so that the bass drum is level,

then secure the legs with the wing nuts.

Step 3

Insert the mounting rod into the tom drum

mounting located on the bass drum and

secure it with wing nut. Slide the tom drum

onto the mounting rod and secure it. Install

snare drum in the same way.

Note:When you tighten the screw under the way of clockwise,the

snare will be closed to the drum head, and it will sound "zizi", which

is different from Tom drum.as right pic, the screw close to the bottom

drumhead.

screw

Remark:Do not adjust the tom drum and

snare drum into the same direction.

Drum key

Tension rod

Washer

Hoop

Drumhead

Shell

Drumhead

Hoop

Washer

Bass drum legs

Tension rod

Drum pedal

Tom drum holder

Tom drum