CB2 PEZZO Montaj Talimatları - Sayfa 4

İç Mekan Mobilyaları CB2 PEZZO için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. CB2 PEZZO 4 sayfaları. Stacking storage unit

pezzo

STACKING STORAGE UNIT / BENCH

Stacking instructions:

Attach 2 metal plates to back of stacked book-

cases with 4 small screws per plate. Bookcases

can be stacked up to 3 bookcases high.

Please note:

- When stacking, the center support is only needed

on the bottom bookcase

- When stacking, product can only be used as a

bookcase, not a media stand

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is

essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs

whenever possible.

NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified

professional or your local hardware store.

A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.

B) Determine the final location of unit. Mark position on the wall, approximately 2" below the mounting bracket mounted to

the back of the unit.

C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the

anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall.

D) Attach 2 mounting brackets to the wall by inserting 2 large screws through each mounting bracket and into the wall

anchor in the wall.

E) Place the unit so the mounting brackets on the back edge are aligned with the wall brackets.

F) Lace one end of the wall strap through both brackets, and into the other end of the strap.

G) Pull the strap tightly until secure.

Wall mounting assembly is now complete.

Made in Vietnam - r05

WALL

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Page 4 of 4