4KDVB HD-F01-TX Kullanıcı Kılavuzu - Sayfa 2

Genişletici 4KDVB HD-F01-TX için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 4KDVB HD-F01-TX 8 sayfaları. Fiber optic extender

If HDMI transmission is needed, please connect HDMI cable to the HDMI connector; if
VGA transmission is needed, please connect VGA cable to the VGA connector. Please
note that HDMI and VGA can not be transmitted at the same time.

3. DIP Switch

Dial up is "OFF", the corresponding number is "1"; dial down is "ON", the corresponding
number is "0".
DIP switch operating instructions as shown in Table 1.
The
DIP
Dial Switch 1
Dial Switch 2
Dial Switch 3
Dial Switch 4
Note: Input audio of signal source can be embedded through the serial port.
User Manual
HD-F01-TX
Table 1 DIP switch operation instruction
Item
Function
Auto-correct switch when VGA input.
Applying
The HD-F01-TX is in service and the input mode is
Condition
VGA.
If the initial switch state is "ON", dial it to "OFF"
first and then switch it to "ON" quickly (within 1s).
Operation
If the initial switch state is "OFF", dial it to "ON"
first and then switch it to "OFF" quickly (within 1s).
Function
To select HDMI input audio mode.
Applying
Before applying power to the HD-F01-TX or during
Condition
the service of the item.
If the switch sate is "ON", analog audio will be
selected as the input audio for HDMI video.
Operation
If the switch sate is "OFF", HDMI audio will be
selected as the input audio for HDMI video.
Function
To select VGA input audio mode.
Applying
Before applying power to the HD-F01-TX or during
Condition
the service of the item.
If the switch sate is "ON", HDMI audio will be
selected as the input audio for VGA.
Operation
If the switch sate is "OFF", analog audio will be
selected as the input audio for VGA.
Function
To select VGA/HDMI input mode.
Applying
Before applying power to the HD-F01-TX or during
Condition
the service of the item
If the switch is "ON", VGA input is available.
Operation
If the switch is "OFF", HDMI input is available.
Description
2