Datalogic Jet Kullanıcı Kılavuzu
PDA Datalogic Jet için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Datalogic Jet 2 sayfaları. Vehicle cradle
Ayrıca Datalogic Jet için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (2 sayfalar)
Sayfayı Yazdır
ACCESSORIES
94A051013
WIN-NET VEHICLE POWER CAB
(CRADLE)
94ACC1306 ADJUSTABLE ARM KIT FOR
VEHICLE CRADLE
TECHNICAL FEATURES
Datalogic Jet™ Vehicle Cradle
Electrical Features
Power Supply
from 10 to 32 VDC
Consumption (with PDA)
Max. 1.5 A
Quiescent Consumption (without PDA) Max. 5 mA
Indicators
Power on LED (green)
Charge Time (when PDA is off)
Li-Ion Battery: max. 2.5 hours
Communication Features
Interface
RS232
Baud Rate
RS232 = up to 115200 b/sec
Environmental Features
Working Temperature*
0° to +50 °C / +32° to +140 °F
Storage Temperature
-20° to +70 °C / -4° to +158 °F
Humidity
90% non condensing
Degree of Protection
IP30
Vibration Resistance**
EN60068-2-64
RMS: 3.1 g; initial slope: 26dB/oct 5-10 Hz; final slope: -3dB/oct 10-1000 Hz
Shock Resistance
EN60068-2-29 – ±25g, 6ms duration, 500 shock impacts per axis
Mechanical Features
Dimensions
240 x 79 x 48 mm / 9.45 x 3.1 x 1.9 in
Weight
(about) 200 g / 7.05 oz
*
Battery must be charged at a temperature ranging from 0° to +45 °C (+32° to +113 °F).
** for screw mounting.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to
use this equipment.
The device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
WEEE COMPLIANCE
Cable containing an 8A slow-blow fuse for powering
the vehicle cradle from the car cigarette lighter.
positionable arm for mounting the cradle in the
vehicle
frequency
range
5-1000
Hz;
822000601 (Rev. C)
The Datalogic Jet™ Vehicle Cradle allows charging the Datalogic Jet™ PDA battery and holding it
securely in your vehicle. It also functions as a serial communication interface between a Host (typically a
Laptop PC) and the RS232 contacts on the PDA.
A
acceleration
B
C
External microphone/headset jack, microphone and speaker allow managing a vocal communication (see
related paragraph on next page). In particular, two different cradle models are available:
−
Loudspeaker model: vocal communication available through either the built-in speaker and
microphone or a hands free head-set;
−
Standard model: communication available only through hands free head-set.
MOUNTING THE DATALOGIC JET™ VEHICLE CRADLE
The Datalogic Jet™ Vehicle Cradle can be mounted to the desired surface using either the
4 adhesive Velcro strips or the 4 screws.
Figure 2 – Mounting with Velcro Strips
Datalogic Jet™ Vehicle Cradle
I
F
E
G
D
Figure 1 – Datalogic Jet™ Vehicle Cradle
B
(optional)
A
B
Figure 3 – Mounting with Screws
A)
Velcro Adhesive Strip Seats
B)
Ext. Microphone/Headset Jack
C)
LED Indicator
D)
Microphone
E)
PDA Contacts
F)
Mounting Holes
G)
Power Connector (Jack)
H)
RS232 Connector
I)
Loudspeaker
H
A