Dustless Dustie Kurulum Talimatı - Sayfa 2

Öğütücü Dustless Dustie için çevrimiçi göz atın veya pdf Kurulum Talimatı indirin. Dustless Dustie 2 sayfaları. For right angle grinders

nstallation nstruction

FOR RIGHT NGLE GRINDERS

1. UN-PLUG GRINDER. Slip shroud

on grinder, flanges should be flush

with attachment.

4. Tighten band clamp.

7. Secure other end of hose to the electric cord with

releaseable tie provided.

lways make sure grinder is UNPLUGGED when removing

W RNING

or attaching front noseclip. Before use, refer to your tool

manual for warnings and instructions.

2. Cut flanges to adjust height of shroud.

For best dust control, grinding wheel

should be 1/4 inch below shroud.

5. Install Grinding wheel. For best dust

control, wheel should be 1/4 inch

below shroud.

3. Install grinding wheel. See #2

for height.

6. Insert hose to port.

Instructions for Crack Chasing/Tuckpointing pplication

1. Trim Flanges to adjust cutting wheel in middle of shroud.

2. Cut the Dustie on "CC Line" or "TP Line" depending on your

desired opening angle. Follow instructions 2-7 above.

3. Snap on Cover Plate* over open face.

*Not Included with all kits

This product was inspected and packaged carefully before being

shipped from the factory. f you should happen to need assistance

during assembly or operation, call 1-800-568-3949 for our

customer service department.

dustlesste hnologies. om

Includes:

• Dustie™ shroud

• Band clamp

• Releasable zip tie

800.568.3949

Manual082010