CBD Powerwashers Honda GX390 Manuel - Sayfa 4

Basınçlı Yıkama CBD Powerwashers Honda GX390 için çevrimiçi göz atın veya pdf Manuel indirin. CBD Powerwashers Honda GX390 8 sayfaları.

OPERATING THE WASHER

Position the washer at a convenient place within your work area, ideally in an airy room or

outside where you can easily start the machine and connect hoses etc. If there is not enough

air, a malfunction or an overheating may occur.

Now you can follow these simple step-by-step instructions:

1. Check fuel tank level and top up as necessary. Ensure that the cap is fully and tightly

on. Lower suction hose into water tank

2. Make sure the throttle is fully open

3. Pull the pull cord to start the engine

4. When the engine is running you can hold handgun in open position to begin sucking

water into pump

5. Do not point water jet at or near humans/animals, injury may occur

6. When finished the job turn the key to the off position and release pressure in hose by

pulling trigger

TROUBLESHOOTING F, A, Q,

If for some reason, you discover that the machine is not working, follow these hints before

requesting the help of a qualified engineer.

Check that the fuel tank has the appropriate amount of fuel in it.

•

Check the air box is not being restricted in anyway.

•

Check y-strainer and suction filter are not blocked.

•

Ensure the suction hose is fully submerged in water and has ample supply

•

Leave for 30 minutes as the temperature safety switch may have triggered and it will

•

need time to cool down. Move to cooler location to get more ventilation.

If after the procedures have been carried out and the machine still does not function, please

contact our service department.