CBD-Tech Chitu V3.6 Kullanıcı Kılavuzu - Sayfa 11

Anakart CBD-Tech Chitu V3.6 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CBD-Tech Chitu V3.6 11 sayfaları.

5.How to adjust the drive current of the drive chip?

Answer：

At present, the driving chip current is calculated by I=U/0.8 (driving voltage

divided by 0.8), the factory default is 0.85V, the driving (rotary

potentiometer) voltage is the highest recommendation does not exceed 1.1V

(driving chip current is too high to force the cooling), the following

describes how to measure the driving voltage, as shown below.

Use a multimeter to

measure voltage

—