Datalogic Memor Manuel - Sayfa 2

Yerleştirme İstasyonu Datalogic Memor için çevrimiçi göz atın veya pdf Manuel indirin. Datalogic Memor 2 sayfaları. Multi-battery charger
Ayrıca Datalogic Memor için: Kullanıcı Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Kılavuz (2 sayfalar)

Sayfayı Yazdır
Datalogic Memor Manuel
By inserting the Datalogic Memor™ into the cradle, data can be transmitted to the host and its battery
begins charging if the power supply is connected. In addition, a spare battery can be charged by inserting
it into the slot at the back of the Datalogic Memor™ Single Cradle as shown in the following figure.
Spare battery Charge
Slot with Spare
Battery Inserted
Figure 2 – Datalogic Memor™ Single Cradle Charging and Communication
The LEDs positioned on the front part of the Datalogic Memor™ Single Cradle (see figure below) indicate
the cradle and spare battery charger status:
Power LED
Figure 3 - LED Indicators
LED
STATUS
Charger
Red Constant
Green Constant
Power
Green
*
During charging, the LED may turn off to indicate a temporary suspension of charging.
Data Transmission and Mobile
Computer Battery Charging
Spare Battery
Charger LED
Spare battery charging*
Spare battery charge completed
it is constant when the cradle is powered
The Datalogic Memor™ Single Cradle can be connected to a host by means of a USB interface or an
RS232 interface.
USB CONNECTION
The Datalogic Memor™ Single Cradle can be connected to the host by means of any standard Mini USB
cable.
Once the host has been turned on, insert the Datalogic Memor™ mobile computer into the cradle.
A
Figure 4 - USB Connection
A)
Host Computer
B)
Std Mini USB (i.e. 94A051016 CAB-421)
*
Recommended power supply: 94ACC1324 PG5-30P35 AC/DC POWER SUPPLY EU/USA PLUG.
RS232 CONNECTION
A Datalogic Memor™ Single Cradle can be connected to the host by means of any standard null modem
cable. The 9-pin female D-Sub connector must be connected to the RS232 port of the cradle.
Once the host has been turned on, insert the Datalogic Memor™ mobile computer into the cradle.
A
Figure 5 - RS232 Connection
A)
Host Computer
B)
Null Modem cable (i.e. 94A051020
CAB-427)
*
Recommended power supply: 94ACC1324 PG5-30P35 AC/DC POWER SUPPLY EU/USA PLUG.
C
B
D*
C)
Datalogic Memor™ Single Cradle
D)
*Power Supply (only necessary for battery charging)
C
B
D*
C)
Datalogic Memor™ Single Cradle
D)
*Power Supply (only necessary for battery charging)