Dusun DSHT-040 Kullanıcı Kılavuzu

Termostat Dusun DSHT-040 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dusun DSHT-040 2 sayfaları.

Sayfayı Yazdır
Dusun DSHT-040 Kullanıcı Kılavuzu
DSHT-040 Room Thermostat
User Guide
Zigbee TYPE
Welcome
Thank you for your purchase.
Your new thermostat will provide uniform and comfortable temperature
control throughout every room in your peoperty. We bring together technology,
reliable product combined with sleek, contemporary design. Please read this
Thermostat
1pc
Screws
4pc
User Guide
2pc
1pc
QC Passed
SYSTEM TYPE
1. Warm air, hot water, high e
at pumps, steam, gravity.
2. Heat only--including power to open and close zone valves, and normally
open zone valves.
3. Heat only with fan.
4. Cool only.
FEATURES
On Appearance
2. 4.8 inch large colorful display creates your colorful life.
4. Amazing silver frame opens your modern life.
2cm (0.787 inch).
7. Wall mounted
and Italy etc,.
increase the
the temperature sensing accuracy.
10. 12 terminals are available for many systems.
℃accuracy keeps temperature within the level you set.
2. 1℉
3.℃ or ℉ choice.
4. 7 days four periods programmable.
5. Temporary programmable.
6. Holiday mode.
8. No limit to add thermostats in App.
9. Support Smart Scene.
10. Support to make two stage grouops.
11. Support device sharing.
12. Weather, UV index, humidity display help you decide what to wear today.
TECHNICAL DATA
Power Supply: 24VDC/AC ±10%
Sensor: NTC3950, 10K
Set Temp. Range: 42-122℉(5~50℃)
Accuracy: ±1℉
Display Temp. Range: 41~210℉(5~99℃)
Ambient Temp: 32~113℉(0~45℃)
Ambient Humidity: 5~95%RH(Non Condensing)
Storage Temp: 23~113℉ (-5~45℃)
Timing Error: <1%
Shell Material: PC+ABS(Fireproof)
Hole Distance of 86±3mm (USA and Italy etc,.)
Wire Terminals: Wire 2×1.5mm2 or 1×2.5mm2
DIMENSION
Unit: mm (inch)
130.0 (5.12)
103.8 (4.09)
20.9 (0.82)
17.2 (0.68)
104.5 (4.11)
82.3 ± 3（5.12 ± 0.12）
60.0 ± 3（2.36 ± 0.12）
HOME SCREEN QUICK REFERENCE
BEFORE WIRING AND INSTALLING
3. Installer must be a trained, experienced service technician.
CAUTION
Electrical Shock or Equipment Damage Hazard. Can shock individuals or
short equipment circuitry.
For wiring , please refer to another page.
INSTALLATION
Your thermostat can be mounted horizontally on the wall or on a 4 in. x 2 in.
(101.6 mm x 50.8 mm) wiring box.
I
NO
YES
NO
NO
5FEET
(1.5METERS)
— Hot or cold air from ducts.
— Radiant heat from sun or appliances.
— Concealed pipes and chimneys.
— Unheated (uncooled) areas.
Steps
Step 1. Keep the electricity o .
Fig 1
Step 3. Complete the wiring according to the wiring diagram and select the appropriate
Fig 2
Fig 2
F
F ig
Fig 2
F
Fig
g 2
ig
g 2
g 2
2
thermostat display panel. See Fig 3.
Fig 3
F
F
F
Fig 2
F
ig
g 2
ig
See Fig 4.
Fig 4
OPERATION
1. Power On/
Press
Press
to select the mode AUTO, COOL,
HEAT, OFF, EMER
COOL — Thermostat controls the cooling system.
EMER — Emergency heat cycles to maintain temperature. Compressor is
locked out (used only for 2H/1C or 3H/2C heat pump systems) and auxiliary
heat turns on as second stage if needed.
:
Press
to set the Permanent Hold, Temporary Hold, Using Schedule
Permanent Hold - Manual. In this mode, press
/
to set
temperature by manual.
Temporary Hold. During Using Schedule or in this mode, press
/
next scheduled period.
Using Schedule. 7 days a week, four periods programmable daily.
Holiday Mode.
of days.
Press
Touch the icon
/
to set your minute.
; Touch the icon
Then press
,
/
set your hour.
Then press
set your week.
How to adjust your schedule?
Press the icon
then use the
/
arrows to set the temp. for the 1st
period. Repeat this process for periods 2-4.
Get Up — Period when you awaken and want your home at a
comfortable temperature.
Go Out — Period when you are away from home and want an
energy-saving temperature.
Go Home — Period when you return home and want your home
back to a comfortable temperature.
Sleep — Period when you are asleep and want an energy saving
temperature.
Fact
Setpoints
Schedule Period
Time
Heat
Cool
72
72
Get Up
6:00 AM
(22
)
(22
)
72
72
Go Out
8:00 AM
(22
)
(22
)
72
72
Go Home
11:30 AM
(22
)
(22
)
72
72
Sleep
01:30 AM
(22
)
(22
)
How to adjust your holiday?
displays and days
Press
the screen then click
/
arrows to set the days of holiday .
to set the temp. Holiday mode will be valid immediately.
:
4.
Then press
to change the di erent items. You can press
/
User Setup
Function
Setting and options
Default
Number
to