Datalogic Skorpio X5 Hızlı Başlangıç Kılavuzu - Sayfa 2

Dokunmatik terminaller Datalogic Skorpio X5 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Datalogic Skorpio X5 2 sayfaları. 4 slot battery charger
Ayrıca Datalogic Skorpio X5 için: Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Datalogic Skorpio X5 Hızlı Başlangıç Kılavuzu
POWER THE DOCK
CAUTION: Use only the Datalogic power supply
91ACC0048 to power the 4 Slot Battery Charger.
Press the locking clip and pull the plug to remove the power supply
cable:
CHARGE THE SPARE BATTERY
To charge up to four spare batteries, insert the battery pack and
press it into the slot until the battery latch snaps into place. Char-
ging starts automatically.
To remove the battery, release the latch on the battery pack.
DAISY CHAIN CONNECTION
The daisy chain connection allows to power two chargers with one
power supply.
To connect a second charger use the Power Jumper (available as
optional accessory, p/n 91ACC0049).
1. Connect the first charger to the second charger using the
power jumper.
2. Connect the power supply to the first charger.
3. Plug the power supply into the AC/DC plug.
LED INDICATORS
LED Behavior
Operation Status
Power ON
Solid blue
Dock is powered
Battery Slot
Solid blue
No battery
Solid orange
Battery is charging
Solid green
Charge completed
Blinking red
Error
TECHNICAL SPECIFICATIONS
Mechanical Features
Dimensions
218 x 161 x 44 mm / 8.6 x 6.4 x 1.7 in
Weight
460 g / 16.2 oz
Electrical Features
Power supply
1
12VDC +/-5% @ 6A
Consumption
Max 5.5 A
Indicators
Power on LED (blue)
4 Battery charge status LEDs (orange/green/
red)
Spare slot charge time
Std battery: 2h (0-90%)
High Cap Battery: 4h (0-90%)
Environmental Features
Operating Temperature
-20° to 50°C
Storage Temperature
2
-30°C to 70°C
Humidity
95% non condensing
Electrostatic discharge EN
4 KV contact / 8 KV air
61000-4-2
1 Use only DL approved power adapters.
2 The Skorpio X5 and the spare batteries should be charged at an ambient tempera-
ture between 0 - 40º C to achieve the maximum charging rate. Never charge the main
device or spare battery in a closed space where excessive heat can build up.
Close to the limits of the working temperature, some display and/or battery perfor-
mance degradation may occur.