DuTCH audio IM2.1 Manuel

Kayıt Ekipmanları DuTCH audio IM2.1 için çevrimiçi göz atın veya pdf Manuel indirin. DuTCH audio IM2.1 5 sayfaları.

DuTCH audio IM2.1 manual

(v1.0 17-07-2018)

Thank you for purchasing the DuTCH audio mastering Insert Matrix IM2.1. In this manual I

will explain how this device works and how to use it. Since this is not really a beginner's

device, I will skip the basics and focus on it's functions. I will go from the inputs (left side),

to the inserts (middle) and to the outputs (right side), basically how the device handles

signals.

Inputs:

Input 1 / input 2:

You can choose between the 2 inputs by

pushing the corresponding button. It's also

possible to use both inputs at the same time,

but keep in mind that this could cause some

impedance changes.

Swap L/R:

When you engage the 'swap l/r' button the left

and right channel will be swapped in order.

Sometimes this will bring things to the surface

that you didn't notice before because of the

new listening approach.

Polarity:

The 'polarity' button will swap the polarity of

both Left and Right. Sometimes swapping

polarity will give a better response, mostly in the low frequencies. In most cases swapping

polarity is not needed, but in the cases where you want to, this button comes in very handy.

Keep in mind that obviously this only works with balanced signals.

Active gain:

Both inputs are passive with just relays, but by pushing the 'active gain' button you will

enable the active gain stage which enables you to change the input gain to your liking. In

the mid/0 position, there is no gain applied though it passes the active gain circuit. You can

change the gain in 23x0.5dB steps from +5.5dB to -5.5dB with stepped switches.